Paper Theory Patterns Zadie Jumpsuit

This is such a beloved pattern in the sewing community and if you have not made a zadie so far then what are you waiting for! Another review of this much loved pattern is not really needed I guess, but I did want to share a couple of things that I have found are really helpful in getting a nice result. Firstly, the fabric choice is really important i.e. a tighly woven fabric with a nice drape. The only Zadie-fail I have experienced is I made a pair with a (really beautiful) woven linen from merchant and mills but the fabric was a bit loosely woven and therefore did not stand up well to the tension needed at the tie waist and has bagged out a bit. I made a version in a very inexpensive drapey chambray and it was a winner and a version in a Liberty tana lawn which also worked v well. The other thing is to make sure that the wrap tie is sitting on the natural waist which may mean taking a bit of length out of the bodice if you are shorter like me. The pants include a lot of rise - again this has been commented on a lot - but I would say don't be shy in taking out rise if you are short, it definitely gives a better fit. Happy Zadie making!

Yowsers, this turned out so much better in real life than I could even imagine. This was my first time sewing with velvet which was really shifty to cut and sew with, but this pattern is not particularly fitted so any dodgy bits are not obvious.

Fit
My measurements matched size 8 at the bust, 12 at the waist and 10 at the hips. I knew from my first Zadie that there’s a fair amount of ease at the waist so I went with 10 at the waist, and 8 for the hips/legs to slim it down a little.
Details on how I fit my first Zadie are here, but I added an upper rounded adjustment to this one.

Fabric
Silk viscose velvet. Oh my goodness, this felt absolutely gorgeous. The silkiness against my skin felt luxurious and the velvet pile was so soft. I put it in the washing machine on the woollens cycle at 30 degrees, spin at 600 and into the tumble dryer on the smoothing setting - an 8 min cycle at low temperature to remove creases, and then air dried. It came out absolutely fine. (I don’t have the patience for hand washing!).

General advice seemed to be to have the nap running down the garment, but I preferred the look of it running upwards giving it a deeper and more uniform colour.

Pattern changes
I did change the order of construction because I wanted the satin binding to only go round the bodice, and not down the trousers to avoid it ‘pointing’ to the crotch. This is the order I sewed it in:

1. Before attaching bodice to trousers, sewing the binding to the bodice neckline, leaving gap for where the tie belt attaches.
2. Sew the leg pieces together including the crotch. I finished the wrap edge of the trousers with binding folded to the inside (having already cut this section 1cm wider to allow for the binding to be folded under)
3. Attach bodice to trousers at the waist seam.
4. Attach belt ties to bodice with hand stitching.

I overlocked all the pieces before sewing the seams as they would be pressed open to reduce bulk.

Other changes I made:

1. Used the satin binding to finish the raw edges on the wrap section of the trousers and hem, by folding it to the inside.
3. Lengthened the sleeves by 7cm (but no hem allowance needed in this due to the binding finish rather than folding it under)
4. Cut and spread the sleeves to give an extra 6cm in width for the gathering at the wrist, using satin binding as a cuff.
5. Made the trousers full length.

Conclusion:
I am totally in love with this version of the Zadie. The fabric and pattern combo is such a winner for me, and I love that a few changes have made a more casual outfit into occasion wear. I love the wrap front and tie belt to give shape. The wrap front gives me enough coverage and it feels so chic yet very comfortable to wear. This is my second Zadie and it won’t be my last.

Loads of photos, details of the changes I made and the tips I used for cutting/sewing/pressing velvet are in my blog post here.

I don't understand why this pattern is so popular. I've made two-- hope against hope-and I never wear them and I can't get anyone to take them off my hands. Since they use so much fabric, I'm going to take them apart and make something else. They are unflattering on everyone and they're uncomfortable unless you take a seat and don't move. Too much fiddling with the neckline.

After following advice from others I made the top true to normal shop size & bottom one size down. Also took 2 inches of rise. Fitted perfectly. Looking forward to wearing it out.

I’ve been thinking that I’d love a light-weight Zadie for an up-coming holiday but also something glitzy for Christmas. I’ve never made up a jumpsuit so this was new territory!

I was hoping to make up a wearable playsuit toile but knew this first version may not be perfect.

After much research I sized down one size to a size 8. I also took 2 inches from the rise in the leg pieces, at the shorten/lengthen pattern line near the hip. I did not touch the upper pattern pieces.

The result was miraculously perfect!!! I wouldn’t change a thing! What luck!

I used a very cheap light weight seersucker fabric.

It literally feels like wearing nothing!

There’s lots of tips and images on my blog post if you’d like to read more.  Click Here