Mixed Feelings

A review of Forget-me-not Patterns Adeline Dress & Top

Reviewed by pam_parsnip on 4th September, 2021

This is an honest review. We invest money, fabric, time and energy in sewing and its important to have as much information as possible.

This pattern makes up into a nice wearable top.

The making of it was not quite as enjoyable as it might have been, loss of stars, but are things to bear in mind rather than total deal-breakers.

I chose it because I wanted a wrap top with a shawl collar and set in sleeves. They are quite difficult to find, so if this is your style, then definitely go for it!

My version is adjusted length, between the top and the dress. (Something the Forgetmeknot patterns blog says not to do!!)

Firstly the bit which is useful to know for any wrap garment.

– the ties attach to each front edge. The long tie is on the underneath section, passes through a slit in the side seam to the outside, covers the back waist seam and ties at the far side. The short tie ties directly to the long one.

– its up to you which side you choose.

– the underflap does not extend to the side seam, its about 75% coverage depending on how tightly you tie it, and the pattern suggests that if you want less leg-flashing, to extend this pattern piece by 10-15cm. This is not included in the pattern piece, you are on your own if you want to do this.

Sizing and Fitting:

I chose a larger size to give the option of wearing a layer underneath. I think its quite a small draft – the shoulders fit me and I think my shoulders are quite narrow. The armscye is also on the high side – it doesnt cut in but is not as roomy as Id like for my extra layer. If I make this again, I will change that.

I measured my centre back neck to waist, and compared with the pattern. I have 4cm of ease. I considered shortening the back piece but left as is and glad I did.

Pattern PDF:

Normally no problem with sticking A4 together but this was a difficulty as the pattern is set to print in the margins.. You might not find this an issue if you can set your printer, or go for the A0 copyshop.

The ‘check the scale’ box is on Page 4 – not page 1, you have to go searching for it.

Seam allowance:

Varies between 1cm and 1.5cm. The pattern says main construction seams are 1.5, everything else is 1cm, for purpose of not wasting fabric. Really? Because I can make another garment out of those little differences? No its just annoying. The pattern layout is generous; you’re not squeezing pieces together.

Waist pleats:

The pleats all round the waist seam front and back control the fullness. There are no bust darts.

I very carefully matched up the notches but did not manage to get the perfectly aligned pleats that I would have liked. I decided to be happy with it as is because my fabric is so busy, plus the back tie covers the joins. The pattern advises : Do not press the pleats, they are designed to fall softly. I disagree, because pressing them well during the making stage, and using lots of vertical pins, or even basting them, puts the pleats exactly where you need before sewing. Also helps avoid catching the underside pleats in the machine as you sew and distorting them. You can ‘unpress them’ when you’ve finished. Alternatively, Instagram is full of pictures where the pleats have been topstitched, a really nice effect.

Seams:

Pattern says either overlock or zig zag all seam edges. Not keen on that, so french seams for side seams, incorporating the tie opening slit, and flat fell for sleeve head. Was able to do that with the 1cm seam allowance. Im thinking of binding the waist seam (Hong Kong finish), just to hide those extra raw edges.

Shawl collar:

This was nice and straightforward. Lots of wrap dresses have a diagonal front with a bias bound edge which is easy to stretch out of shape. This has a facing. It is attached at shoulders and waist and otherwise flaps free. You understitch and its easy to get a nice finish.

Sleeves:

I chose to do the plain ¾ sleeves. There are options to do pleat details. Im thinking of adding a cuff/closed sleeve band as the length is a bit awkward, just below the elbow. When you put on a jacket the sleeves go with it and bunch up. Not good.

Hem:

The pattern has a curved, bias bound hem which I left off completely and did a simple square finish.

If I was making it again as a dress, I would find a better way of controlling those angled pleats. But Im not sure I want to make this again. (This is unusual for me, I normally make and remake, tweak the fit and get maximum value).

Thank you for reading. More pics on Instagram. Happy Sewing!!